Radiant Group

Mody Industries (F.C.) Pvt. Ltd.


MODY is a leading manufacturer and pioneers in the manufacture of Submersible Dewatering, Non-Clog Sludge, Sewage and Non- Submersible Portable Fire Fighting Pumps for use in various applications. The company has an ultra modern manufacturing plant located in Thane, Maharashtra State which is well equipped with all modern machines like CNC Machines, digitally controlled dynamic balancing machines and digital performance testing facility.


These pumps have been supplied in all the industrial Segments like Thermal & Nuclear Power Plants, Indian Navy, Steel Industry, Mining Sector, Utility, Cement Industry and all leading Construction companies.


A brief description about the products manufactured by us is as under:


Dewatering Line (M & G – Series)

Pioneers in the Indian subcontinent, these rugged drainage pumps are used in the severest of applications; at construction sites, mines, power stations, steel plants, ships and the aquaculture industry. Every ounce of superior workmanship goes into each step of manufacturing, from raw material sourcing, to casting and machining, to final assembly and individual unit testing at our in-house computerized state of art test bed ensuring total quality control and unsurpassed reliability built into the entire range of pumps.


Design Advantages

1. Available from 1/2 HP to 35 HP.

2. Flows from 50 LPM to 7500 LPM.

3. Discharge Heads from 2M to 85M.

4. Available in light weight Aluminium or Stainless Steel with corrosion/abrasion resistant SS wet ends.

5. Built in automatic ON/OFF/ON thermal switches Protect the motor.

6. Thermal protectors wired directly to built-in contactor. (Most Models)

7. Patented Tandem Tungsten Carbide / Silicon Carbide and Tungsten Carbide / Ceramic mechanical seals wholly enclosed in a pressure compensated oil chamber. (Most models)

8. Equipped with a moisture sensor that detects progressive seal wear and automatically shuts down the pump. (Optional)

9. Field adjustable Nitride Rubber-lined Diffuser/Wear Plate optimizes efficiency throughout the life of the pump.

10. Can be equipped with sacrificial Zinc anodes for maximum life in a saline fluid environment as well as as in-built non-return valve or water level controller. (Optional)

11. Continuous rated 'F' class heavy duty motors available in any voltage / frequency combinations.


Non – Clog Series (NC Series)


The MODY NON-GLOG Submersible pump line was specially developed for applications where large solid particles were present in the fluid. These stainless steel wet end, vortex style, recessed impeller pumps are ideal for corrosive / abrasive applications in the sewage, food screening, concrete and waste water treatment industries.



Design Advantages


1. Available in 6 HP, 8 HP and 10 HP and 10 HP versions.

2. Max solid handling capability 60 MM.

3. Available in Aluminium, Cast Iron or Stainless Steel.

4. Built-in automatic ON/OFF/ON thermal switches protect the motor.

5. Thermal protectors wired directly to built-in contactor.

6. 410 Stainless steel shaft, Impeller and 304 SS Casing, Hardware for maximum corrosion resistance.

7. Patented Tandem Tungsten Carbide / Silicon Carbide and Tungsten Carbide / Ceramic Mechanical Seals wholly enclosed in a pressure compensated oil chamber.

8. Equipped with a moisture sensor that detects progressive seal wear and automatically shuts down the pump (optional).

9. Replaceable Nitride Rubber-Lined wear plate optimizes efficiency through out the life of the pump.

10. Can be equipped with sacrificial zinc anodes for maximum life in a saline fluid environment as well as an in-built non-return value or water level controller (optional).

11. Continuous rated 'F' class heavy duty motors available in any voltage / frequency combinations.



Sewage Series (MS Series)


The MODY Sewage Submersible pump is of heavy duty, vertical, direct-drive, non-clog centrifugal, submersible type suitable for use in service with ambient temperatures at 104F. The pumps is suitably

Designed and constructed to pump sewage, storm water, heavy sludge and fibrous materials without injurious damage during operation.



Design Advantages


1. Available in 2HP to 20 HP, 175 LPM to 7800 LPM

2. Discharge heads 1.5 to 25mtrs

3. Cast Iron Construction, also available in complete Stainless Steel.

4. Built in automatic ON/OFF/ON Thermisters for motor protection.

5. Compact Tandem Tungsten Carbide/ Tungsten Carbide and Tungsten Carbide/ Tungsten Carbide Mechanical Seals with minimum shaft overhang.

6. Optional Moisture sensor that detect progressive seal wear and automatically shuts down the pump.

7. Single channel impeller hydraulically balanced with improved flow pattern contribute to a virtually clog free pump, computer designed smooth control volutes result in high efficiency and low head/ running cost

8. Wear rings that optimize efficiency throughout the life of the pump

9. Integrally Cast Cooling Fins on motor casing with large surface area ensuring efficient heat dissipation and low temperature rise; Shrink fitted Stators and Short overhang facilitating elongated life in the most severe waste water pumping environments.

10. Surface treatment, Including with Epoxy and subsequent coat of black choleric paint for maximum corrosion resistance.

11. Continuous rated ‘F’ Class; triple-dipped and epoxy heavy duty Motors available in any voltage/ frequency Combination.


Swimming Pool Cleaners


The MODY Submersible Vacuum Pump Pool Cleaner has revolutionized the way we clean pools today. The modern concept of using an electric submersible pump connected to a wide suction nozzle, fitted with a spring actuated nylon brush effectively removes muck accumulated on the floor and walls of pool. Water is channelled through a SS strainer to trap large solids stones and then filtered through double fine mesh filter bags that collect even the smallest of particles leaving the re-circulated water sparkling clean. Operated by extensions rods this lightweight machine is both versatile and economical.

Design Advantages

1. Absolutely no wastage of water.

2. Frame is plastic coated to avoid damage to the pool tiles.

3. Lightweight, easily manoeuvrable on adjustable nylon wheels in and out of the water.

4. Can double as a dewatering pump when required.

5. An inbuilt wall cleaning attachment is provided.

6. Rugged submersible motor with outer mechanical seals and a secondary inner lip seal.

7. Available in 1.3 HP and 2 HP models depending on the size of the pool with a single phase version in the 1.3 HP model.